| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type of enamelled wire | High mechanical/ strength |
Self solderable/ & bondable |
General/ purpose |
High mechanical/ strength |
High Thermal & mechanical/ strength |
High temperature |
High temperature |
Self solderable |
Self solderable |
Self solderable |
High temperature |
Self solderable |
High temperature |
General/ purpose |
Self solderable/ Self bonding |
Self solderable/ Self bonding |
Self bonding | General/ purpose |
General/ purpose |
Self solderable/ High Temperature |
|
| SPECIFICATION STANDARD * |
IS : 13730-1/ IEC-60317-1/ NEMA MW-15C/ JIS C 3202-PVF |
IS : 13730-2/ IEC-60317-2 |
IS : 13730-3/ IEC-60317-3/ NEMA MW-5C |
IS : 13730-4/ IEC-60317-4/ NEMA MW-75C/ JIS C 3202-UEW |
IS : 13730-7/ IEC-60317-7 |
IS : 13730-8/ IEC-60317-8/ NEMA MW-30C/ 72C (Hermetic) JIS C 3202-EIW |
IS : 13730-13/ IEC-60317-13/ NEMA MW-35C/ 73C (Hermetic) |
IS : 13730-19/ IEC-60317-19/ NEMA MW-28C |
IS : 13730-20/ IEC-60317-20/ NEMA MW-79C |
IS : 13730-21/ IEC-60317-21 |
IS : 13730-22/ IEC-60317-22/ NEMA MW-76C |
IS : 13730-23/ IEC-60317-23 |
IS : 13730 (Under/ preparation)/ IEC-60317(Under preparation)/ NEMA MW-24C |
IS : 13730-26/ IEC-60317-26/ NEMA MW-81C |
IS : 13730-34/ IEC-60317-34/ JIS C 3202-PEW |
IS : 13730-35/ IEC-60317-35 JIS C 3202-SBUEW |
IS : 13730-36/ IEC-60317-36 JIS C 3202-SBUEW |
IS : 13730-37/ IEC-60317-37 |
IS : 13730-45/ IEC-60317-45 |
IS : 13730-54/ IEC-60317-54 |
IS : 13730-51/ IEC-60317-51/ NEMA MW-82C |
| THERMAL CLASS | 130 (B) | 130 (B) | 155 (F) | 130 (B) | 200 | 180 (H) | 200 (C) | 130 (B) | 155 (F) | 155 (F) | 180 (H) | 180 (H) | 155 (F) | 200 (C) | 130 (B) | 155 (F) | 180 (H) | 180 (H) | 130 (B) | 155 (F) | 180 (H) |
| Chemical base of base/ Single coat | Modified Polyvinyl Acetal |
Polyurethane | Modified Polyester |
Polyurethane | Polyimide | Polyesterimide | Theicpolyester/ Polyesterimide |
Polyurethane | Polyurethane | Polyurethane | Polyester/ Polyesterimide |
Polyesterimide | Polyester | Polyamideimide | Polyester | Polyurethane | Polyesterimide | Polyesterimide | Polyester | Polyester | Polyurethane |
| Chemical base of top coat | Polyvinyl butyral/Polyamide |
Polyamideimide | Nylon | Nylon | Nylon | Polyvinyl butyral/Polyamide |
Polyvinyl butyral/Polyamide |
Polyvinyl butyral/Polyamide |
|||||||||||||
| Range of Wire (Diameter) | 5.000-0.500 mm | 2.000-0.050 mm | 5.000-0.050 mm | 2.000-0.050 mm | 5.000-0.020 mm | 5.000-0.050 mm | 5.000-0.050 mm | 2.000-0.050 mm | 0.800-0.050 mm | 1.60-0.050 mm | 5.000-0.050 mm | 1.60-0.050 mm | 1.60-0.254 mm | 1.60-0.071 mm | 5.000-0.050 mm | 0.800-0.050 mm | 1.60-0.050 mm | 1.60-0.050 mm | 5.000-0.050 mm | 5.000-0.050 mm | 1.00-0.050 mm |
| Insulation Range | Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1 & 2 as per IEC (Single & Heavy as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1b,2b & 3b as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1b,2b & 3b as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1b,2b & 3b as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
Grade 1,2 & 3 as per IEC (Single, Heavy & Triple as per NEMA) |
| Standard colour | Golden Yellow to Light Orange |
As per requirements |
Light Brown/ Medium Brown |
As per requirements |
Golden Yellow to Light Orange |
Light Brown/ Medium Brown |
Light Brown/ Medium Brown |
As per requirements |
As per requirements |
As per requirements |
Medium Brown to Dark Brown |
Light Brown | As per requirements |
Light Brown | Medium Brown | As per requirements |
Light Brown/ Dark Brown |
Light Brown/ Dark Brown |
Light Brown/ Medium Brown |
Light Brown/ Medium Brown |
As per requirements |
| UL Listed | File No. : None | File No. : None | File No. : None | File No. : None | File No. : None | File No. : None | File No. : E174288 Thermal Class 200 and 220 |
File No. : E174288 Thermal Class 155 |
File No. : E174288 Thermal Class 180 |
File No. : E174288 Thermal Class 155 |
|||||||||||
| TECHNICAL PROPERTIES AS PER IS:13730-0-1 / IEC-60317-0-1 |
|||||||||||||||||||||
| Heat shock (°C) | 155 | 155 | 175 | 155 | 240 | 200 | 220 | 155 | 175 | 175 | 200 | 200 | 175 | 220 | 155 | 175 | 200 | 200 | 155 | 175 | 200 |
| Cut through (°C) | 170 | 170 | 240 | 170 | 400 | 300 | 320 | 170 | 200 | 200 | 265 | 265 | 240 | 350 | 240 | 200 | 265 | 300 | 240 | 240 | 240 |
| Solderable temperature (°C) | Not applicable | 375 | Not applicable | 375 | Not applicable | Not applicable | Not applicable | 375 | 390 | 390 | Not applicable | 470 | Not applicable | Not applicable | Not applicable | 390 | 470 | Not applicable | Not applicable | Not applicable | 450 |
| Resistance to Abrasion for 1.00mm dia grade 2 wire (n) |
>11.3 | >9.3 | >10.4 | >9.3 | >6.6 | >10.9 | >11.3 | >9.3 | >8.3 (0.8 mm) |
>9.3 | >10.9 | >10.9 | >10.0 | >7.05 (for gr.1) |
>10.4 | >8.1 | >10.9 | >10.9 | >10.4 | >10.4 | >7.8 |
| Resistance to refrigerants | Very good | Not applicable | Not applicable | Not applicable | Very good | Good | Very good | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Very good | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
| Flexibility & Adherence | Very good | Good | Good | Good | Very good | Good | Very good | Good | Good | Good | Good | Good | Good | Good | Good | Good | Good | Good | Good | Good | Good |
| Bonding Temperature (°C) | Not applicable | 170/200 depending on overcoat |
Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable | 170/200 depending on overcoat |
170/200 depending on overcoat |
170/200 depending on overcoat |
Not applicable | Not applicable | Not applicable |
| SPECIAL CHARACTERSISTICS & APPLICATION |
High mechanical properties, good transformer oil resistance, suitable for 130°C Hermetic applications, used in oil filled transformers & equipments requiring high mechanical properties such as auto electricals. |
Solderable, thermoplastic bonded by heat or solvent, used for all self supported coils for television, electronics, small motors, relays, magnets, telephones & voice coils of all kinds can be bonded in forms by heating at 170/180°C |
Upgraded thermo mechanical properties compared to ordinary polyesters, used in ignition coils, oil filled transformers, relays, contractors, fhp motors. This version can also be made for upgraded abrasion. |
Self solderable property with good insulation resistance, high flexibility used in all communication equipments, relays, magnetic spools, universal & non- impregnated winding of all kinds of transformers. |
Designed for using of wire for product with maximum value of the thermal and mechanical characteristics |
Good resistance against refrigerants, transformer oil. High burnout resistance, used in fhp motors, hermetic application and thermal class 180°C equipments. |
Very good resistance for refrigerants & chemicals, high burnout resistance, excellent windability, low coefficient of friction, high slotfill factor, used in special motors including Hermetic motors, Armatures, Alternators, Power Tools and high HP motors, suitable for high speed coil winding. |
Low coefficient of friction, besides properties of general purpose polyurethane. It is suitable for winding in small size motors, coils of electrical instruments, especially of high speed winding. |
Self solderable property with its low dielectric dissipation factor under high frequency. It can be widely used in electrical instruments of machine tools, motors which have special requirements of this type of enamel. |
Low coefficient of friction, besides properties of polyurethane, suitable for winding in small and medium electrical instruments, for high speed winding. |
Used in all 180°C class equipment requiring high speed machine winding, low coefficient of friction. |
Self solderable with high potential both under the dry and humid conditions, good properties in heat shock and cut through, it is suitable for the coils of various motor appliances, instruments and telephone equipments. |
Good mechanical, electrical & chemical resistance properties. Improved for high speed winding. FHP motors, coils & relays, audio & instrument coils. |
High burnout resistance, excellent windability, low coefficient of friction, high slot fill factor, used in special types of motors & electromotive tools. |
Good thermal & electrical properties, used in general purpose rotating & static electrical equipments, oil transformers, control coils. |
Solderable, thermoplastic bonded by heat or solvent, used for all self supported coils for television, electronics, small motors, relays, magnets, telephones & voice coils of all kinds can be bonded in forms by heating at 170/180°C |
Solderable, thermoplastic bonded by heat or solvent, used for all self supported coils for television, electronics, small motors, relays, magnets, telephones & voice coils of all kinds can be bonded in forms by heating at 170/180°C |
Class 180°C with self bonding property and all other properties of Polyesterimide. |
General purpose 130°C polyster. Good thermal & electrical properties, used in general purpose rotatng & static electrical equipments, oil transformers, control coils. |
General purpose 155°C polyester with heat shock at higher mandrel diameter. Good thermal & electrical properties, used in general purpose rotating & static electrical equipments, oil transformers, control coils. |
Good mechanical, electrical & chemical resistant properties. Improved thermal resistance. Fast solderability. Fractional & integral horsepower motors Class 155. Coils & relays. Instrument & audio coils. |
| Delivery Spools | Please refer to DELIVERY SPOOLS for Sizes & Respective Spool Types | ||||||||||||||||||||
| Special Notes | Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Top coat Polyamide imide can be supplied of the type Self Lubricated, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
Can be supplied with Polyamide (Nylon) topcoated for improved high-speed windability, if required. |
||||||||||||